9 Watt LED Bulb Warm White Dimmable

Warm white LED bulbs are suitable for lounges, hallways, bedroom where people relax.

The enerx 9 watt LED light is designed to replace a 75w incandescent or 15 watt compact fluorescent lamp (CFL).

Each 9 watt LED bulb emits 800 (2800k) to 840 (4300k) lumens of light at an angle of 150°.

They are compact in size being only 60mm Ø and 117mm long.  This makes them perfect for recessed down lights in modern housing.

Dimmable with trailing edge dimmer.

Enerx bulbs contain NO MERCURY, Toxic or Dangerous substances. They transmit NO infrared or UV radiation.

  Item Our Price (NZD)
Was $20.00 Now Only
Was $62.00 Now Only
Was $154.00 Now Only


9 watt LED bulb

replaces 75 watt incandescent/halogen

The enerx 9 watt LED bulb has the latest light technology. It is a superior compact unit, designed and manufactured to replace the 75 watt incandescent/halogen bulb or 18 watt compact fluorescent lamp (CFL). The superior SMD LED components and purity aluminium material makes the luminous efficiency as high as 84.0 Lm/W. It has excellent heat management by a conjoint structure which maintains the housing surface temperature under 69.1°C and LED joint temperature under 76.2°C. 

  9 watt
AC input voltage
AC 85-265v
Power dissipation
9.5 watts
Luminous flux 800Lm±5%
Luminous Efficiency
84 Lm/W
Colour Temperature 2800K
Lighting source
Power factor 0.9
Driver efficiency
Beam Angle
Working Temperature
-20 - +45°C
Quality Guarantee
3 Years
25,000 hrs
NZ Certified
Yes, with trailing edge dimmer

Each enerx light bulb complies with the following Marks

Conformite Europeene (French)
European Conformity

Tested to all the relevant standards that the EU demands.

Restriction of Hazardous Substances

Restriction of the use of certain Hazardous Substances in electrical and electronic equipment . Each individual piece of a finished product must meet all RoHS standards.

Restricted products
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent chromium (Cr⁶⁺)
Polybrominated biphenyls (Pbb)
Polybrominated diphenyl ether (Pbde)

Federal Communications Commission

Rating of electronic Equipment in either class A or B Class B. R.F. Emissions are so low that they do not interfere with other devices such as radio's and TV's.

C Tick

Complies to Relevant New Zealand Standards.
Suppliers Declaration of Conformity form can be issued.

enerx Dimmable LED Bulbs

Important facts for dimming LED light bulbs.

Dimming of LED bulbs is only possible if the bulbs have been manufactured to be dimmed. Installing standard non dimmable LED bulbs in a dimmable lighting circuit will only result in the bulbs continually glowing at full brightness even if the dimmer has been turned down to minimum. This is because each enerx LED bulb is fitted with its own driver that can produce full output voltage to the LED chips even when the input voltage can be between 85 to 265 volts AC.

Use the right Dimmer

When dimming LED light bulbs it is important that you use the right type of dimmer module.

Power Wise recommends that all enerx dimmable LED bulbs are dimmed using a Trailing Edge Dimmer module. A universal light dimmer is also acceptable. Trailing edge dimmers are suitable for all electronic transformers.

Do not connect trailing edge dimmers to inductive loads such as low voltage lighting with iron core transformers.

Loading of LED bulbs on a Dimmer

When dimming LED light bulbs, the total load on a dimmer should be calculated by adding the total wattage of the LED bulbs on the circuit and multiplying by 4. This is because each dimmable LED bulb has its own driver which can cause extra pressure on a dimmer. E.G. if you have 10 x 9 watt LED bulbs on one circuit the Minimal size dimmer required is 360 watts. 10 x 9 x 4 = 360.

Minimum Loads

Be aware that most trailing edge dimmers have a minimum load required of 20 watts. Ensure that the total wattage of your LED bulbs on one circuit is more than the minimum load of the dimmer.

Recommended Brands

PDL 624TM (note) Needs minimum load of 20 watts
Clipsal 32E450TM (Note) Needs minimum load of 20 watts
Kiwi K005T Recommended
Kiwi K004U Universal Dimmer

Trailing Edge Dimmers are not suitable for wire wound transformers when used with halogen lights.

Please contact a Registered Electrician for further advice.