enerex LED Tube 1.2m
The enerx LED 1.2m tube is the perfect replacement for a 36 watt fluorescent tube. Suitable for offices or commercial lighting where uniform, anti flickering energy saving solutions are required.
Pure white colour enables you to see clearly with wide spread 270° beam angle.
The easy fit function enables a direct replacement of an existing tube without the need to rewire the fitting.
Free LED Starter and manual supplied with each tube.
enerx LED tube replacements must be done by a registered Electrician or suitably qualified person in accordance with AS/NZS 3000
enerx LED tubes are NOT suitable for fittings with Electronic Ballasts unless it is rewired.
- Quick, simple and safe replacement without rewiring.
- Low maintenance costs due to long lifetime.
- Energy saving of up to 75%.
- Instant start up, therefore suitable in combination with sensor technology.
- Maximum resistance to switching loads.
- Correct operation even in low temperatures.
- Suitable for Refrigeration
|Easy Fit with no need to rewire fitting
|Instant start up|
Integrated electronic control gear with high
|Wide beam angle: 270º|
|Single end power connection|
|No toxic chemicals|
|CE & RoHS Compliant|
|IP65 waterproof protection|
A: PC Cover
B: PCB Light Source
D: Pure Aluminium Heat Sink
|AC input voltage
||AC 85-265v 50Hz
|Luminous flux||2100 Lumens|
|Ambient Temperature||-20ºC -+45ºC|
|Dimensions||26mmØ X 1200mm|
Each enerx LED Tube complies with the following Marks
Conformite Europeene (French)
Tested to all the relevant standards that the EU demands.
Restriction of Hazardous Substances
Restriction of the use of certain Hazardous Substances in electrical and electronic equipment . Each individual piece of a finished product must meet all RoHS standards.
Federal Communications Commission
Rating of electronic Equipment in either class A or B Class B. R.F. Emissions are so low that they do not interfere with other devices such as radio's and TV's.
Complies to Relevant New Zealand Standards.