3 Step Dimming Led Bulb
Connecting LED bulbs to the right dimmer can be a costly experience.
The enerx 10-watt Stepzone LED bulb can be dimmed easily by just flicking a standard light switch.
With just 3 quick flicks of a light switch it can dimmed from 100% to 10%..
Suitable for mood lighting, childrens bedrooms, hallways or security.
The enerx 10-watt stepzone LED light bulb can be easily dimmed by just flicking a standard light switch. With just 3 flicks it can be dimmed from 100% to 10%.
First flick = 100% Second flick = 50% Third flick = 10%
Direct replacement for conventional 75W incandescent lamp.
Made from specially moulded aluminium shell which is overlaid with high quality pvc lens to enable Omni-directional light of 240°.
Emits a nice soft warm white colour of 2800k
Long life, lasts 20 time longer than standard bulb.
Contains no Toxic or Dangerous Substances.
Complies to NZ standards.
3-Step Dimming LED Bulb
|AC input Voltage||AC85-265 Volts|
|Luminous flux||810 Lumens|
|Lighting source||SMD 2835|
|Dimmable Steps||1(100%), 2(50%), 3(10%)|
|Use with External Dimmer||NO|
|Dimensions||Ø60 x 110mm|
|Base||Edison Screw(E27), Bayonet Cap (B22)|
|Part No:||EX-BC3D10WW, EX-ES3D10WW|
Conformite Europeene (French)
Tested to all the relevant standards that the EU demands.
Restriction of Hazardous Substances
Restriction of the use of certain Hazardous Substances in electrical and electronic equipment . Each individual piece of a finished product must meet all RoHS standards.
Frederal Communications Commission
Rating of electronic Equipment in either class A or class B. R. F. Emissions are so low that they do not interere with other devices such as radio's and TV's.
Complies to Relevant New Zealand Standards.
Suppliers Declaration of Confrmity form can be issued.
The enerx 10 watt stepzone 3 step LED lamp have special electronic circuit boards that alters the light output when the power supply is turned on and off within one second
Step 1 Turn switch on Lamp starts at 100%
Step 2 Turn switch off and on within one second Lamp Dims to 50%
Step 3 Turn switch off and on within one second Lamp Dims to 10%
Step 4 Turn switch off and on within one second Lamp returns to 100%
Step 5 Turn switch off and on for more then one second at any step, lamp will return to 100%